Products > ELECTRONICS > FPGA AND SOC

FPGA-0033

The FPGA-0033 can be configured as Digital Logic design or Digital circuit Design with FPGAs employs a top-tier FPGA device set up as a module, allowing for the use of an FPGA such as Intel’s Altera. It includes features to control multimedia environments using a TFT LCD and a CMOS image sensor. Additionally, the product can be managed via an Android smartphone through Bluetooth wireless communication.

FPGA-0033 configured for digital logic and circuit design with multimedia control features.
  • Specification
  • Fpga Device:
    • Altera or Xilinx or both
  • Clock Control:
    • Adjustable Clock Range: 1 Hz to 50 MHz
  • Memory:
    • SRAM: 4Mbit
    • Serial EEPROM: 16kB
  • Display:
    • Text LCD
    • Array LED (8)
    • Full Color LED (4 cells)
    • 7-Segment Display
    • Array 7-Segment Display (8)
  • Actuators:
    • Servo Motor (1)
    • Step Motor (1)
  • AD/DA:
    • SPI ADC: 1 channel, 8-bit, 1 MHz sampling
    • Parallel DAC: Dual voltage output, 8-bit
  • Sensors:
    • CdS (Light Dependent Resistor)
    • Voltage Meter (LED)
  • Miscellaneous:
    • PIEZO Buzzer
    • Breadboard
    • Dip Switch
    • Push Switch
  • UART:
    • 2 Channel UART (1 USB to Serial, 1 D-Sub 9 Pin)
  • Extension Connector:
    • 2 x 50-pin Connector (FPGA I/O 84 Pin)
    • Combo II, Combo III App Module Compatible
  • Project Module:
    • Traffic Light Module
  • Optional Modules:
    • TFT-LCD
    • Stereo Audio Codec
    • Vending Machine
    • Sensor Module
    • Multimedia Module

SOC-0033

The SOC-0033 board, featuring an ARM 32-bit Cortex-M3 microcontroller, is designed for educational and developmental purposes. It’s ideal for use in laboratories, university and college courses, and various design projects, supporting the creation of advanced digital systems. Accompanying the board are comprehensive resources, including tutorials, pre-prepared lab exercises, and demonstrative examples, making it an excellent choice for academic and development settings.

  • Specification
  • Microcontroller model: ARM 32bit Cortex-M3.
  • Power supply: 5V
  • Working temperature: -10~70℃
  • The Core board function: The core board can be used independently without this development board.
  • USB downloads automatically.
  • 1 opto-isolated power switch.
  • 3 independent buttons.
  • 2 RGB LED lights.
  • 1 active buzzer.
  • 1 RTC supercapacitor.
  • 5V stabilization circuit/1 Type-C serial communication interface.
  • The Development board features:
  • 3 relays.
  • 1 4-wire stepping motor interface.
  • 1 RS485 interface.
  • 2 CAN bus interfaces.
  • 1 analog joystick.
  • 2 capacitive touch buttons.
  • 1 rotary encoder button.
  • The onboard TM1638 drives 16 digital tubes and 16 LEDs. Can be used for special bus communication.
  • 2 Type-C interfaces.
  • 1 SD card slot.
  • 1 MP3 playback control chip.
  • 1 USB disk or USB mouse and keyboard interface.
  • 1 3.3V servo interface.
  • 1 SWD debug interface.
  • 1 breadboard.
  • 1 reset button.
  • 1 wake-up button.
  • 1 LCD screen.
  • 1 light sensor. 1 current adjustment potentiometer.

TECHNICAL EDUCATION AND TRAINING EQUIPMENT

Innovative Training Equipment

About

Privacy

Social