Products > AUTOMATION & CONTROL > ADVANCED PLC TRAINER

PLCA-0033 ADVANCED PLC TRAINER

The PLCA-0033 training system provides practical experience with industrial control equipment, using realistic scenarios on a graphic terminal to mimic real PLC applications. It features advanced industrial components, including a controller, graphic terminal, and Ethernet switch. Digital and analog inputs and outputs are accessible via front panel test sockets, with options to connect controls and lights. The system also includes a fault simulator for introducing electrical faults during troubleshooting exercises.

PLCA-0033 Advanced Programmable Logic Controller Trainer
  • Specification
  • Siemens S7-1200 Series PLC (other models available upon request)
  • Main Module:
    • Includes: Front insulated panel, back cover, PLC, expansion AO modules
    • Power Input: DC Power
    • Switch: DC Power switch
    • I/O Interface: 2mm terminals
    • Digital Inputs: 6 with one common terminal
    • Digital Outputs: 4 transistor, 2 terminals for power supply
    • Analogue Inputs: 2 (1 Voltage, 1 Current) with one common terminal
    • Analogue Output: 1 (Voltage or Current) with one common terminal
    • Windows Compatible PLC Software
  • HMI:
    • Size: 7 inches
    • Resolution: 800×480
    • Color: 16-bit
    • Touch Screen: 4 wires
  • Power Modules:
    • AC Power Module: Single-phase from mains with protection switch and lights
    • DC Power Supply Module: Outputs of 12 Vdc, 24 Vdc, 0-10 Vdc with polarity inversion and over-current protection
  • Simulation Modules:
    • Digital Input Simulation (Retentive): 8 fixed contact switches, 1 NC/1 NO each
    • Digital Input Simulation (Pulse): 8 contact pulse switches, 1 NC/1 NO each
    • Digital Input Simulation (Retentive and Pulse): 4 contact pulse switches and 4 contact retention switches, 1 NC/1 NO each
  • Output Indication and Signal Simulation:
    • Output Digital Signals Indication: 8 LEDs, suitable for PLC with NPN or PNP outputs
    • Voltage/Current Signal Simulation: 2 linear potentiometers (4-20 mA, 0-12 Vdc)
  • Signal Measurement and Conversion:
    • Analogue Signal Measurement: Measure 2 signals (current: 4-20 mA, voltage: 0-10 Vdc)
    • Step Motor Module: 4-bit electronic driver with light indication
    • Relay Module: 4 relays (24 Vdc/3 A), suitable for PLC with NPN or PNP outputs
    • DC Motor and Photoelectric Sensors Module: Suitable for PLC with NPN or PNP inputs
    • A/D Converter Module: 8 bits, input from 0-10 Vdc or 4-20 mA
    • D/A Converter Module: 8 bits, adjustable output from 0-10 Vdc or 4-20 mA

TECHNICAL EDUCATION AND TRAINING EQUIPMENT

Innovative Training Equipment

About

Privacy

Social